-The Dream Cancel Wiki has successfully upgraded it's wiki software and editing has returned. Tables for data have returned.

Template:MoveData-KOF02UM

From Dream Cancel Wiki
Revision as of 13:14, 22 December 2021 by Franck Frost (talk | contribs)
Jump to navigation Jump to search

This template defines the table "MoveData_KOF02UM". View table.

Template DocumentationEdit This Documentation
{{MoveData-KOF02UM | character =  | moveId = 
| name		= 
| idle		= 
| rank		= 
| input		= 
| images	= 
| hitboxes	= 
| damage	= 
| guard		= 
| cancel	= 
| startup	= 
| active	= 
| recovery	= 
| hitadv	= 
| blockadv	= 
| invul		= 
}}

Usage

This template defines and stores values, in this case moves' data, in the MoveData_KOF02UM Cargo Table following a move header or a char's data header. Said data is then queried by Template:FrameData-KOF02UM/Query and made tables of using Template:FrameDataCargo-KOF02UM. It also serves as a tooltip.
Storing a character's moves should be done in their data subpage due to be linked in the bottom external links section of the main page. The format to follow can be found here.


Parameters

How to use each parameter

Main Parameters

| character =

Character's official full name. Not Kensou and Mary but Sie Kensou and Blue Mary.

| moveId =

The move's identification code. It should be written as the character's common name then an underscore followed by the move's input without dot/comma and with an eventual "raw" or "can" mention for relevant command normals. The Id isn't case sensitive but maj's should be avoided.
Kyo's st.A's Id is "kyo_sta", his f+Bs' Ids are "kyo_rawf+b" and "kyo_canf+b". Find more examples below or here.

| idle =

Whether the move is a char's basic action (standing, jumping, etc), in order to use the more appropriate Template:MoveData-KOF02UM/CharHeader.
The action has to be registered with idle set to yes. Idle defaults to no otherwise.

| rank =

Rank the character's basic action. Group height for standing/crouching; speed rank for run/walk and frames away from average for wake-up/recovery roll.

| name =

The move's full name. Not st.A and j.C but stand A and jump C.

| input =

The move's input as would be written going by the Notation. It should respect case sensitiveness, b being back and B being light kick.

| input2 =

The move's input written in a secondary notation, like numpad. If defined, it'll display when the user's mouse hovers over the main input.

| images =

The move's image file(s). Multiple file names should be separated by commas and ordered from first to last.
Please name the files as 02UM_Character_Move_ima.png. If a move warrants multiple images, use 02UM_Character_Move_1_ima.png then with 2, 3 and so on.

| hitboxes =

The move's hitbox file(s). Multiple file names should be separated by commas and ordered from first to last.
Please name the files as 02UM_Character_Move.png. If a move warrants multiple images, use 02UM_Character_Move_1.png then with 2, 3 and so on.

| damage =

The move's damage value, 10 being 1%.
Moves with a few hits should be recorded as "z (x+y)" where x is the first hit's damage, y the second's and z the total.

| guard =

How the move has to be blocked. To be left empty for Throws and unblockables. Otherwise, use Low ([[The_King_of_Fighters_2002_UM/Defense#Low|Low]]), Mid ([[The_King_of_Fighters_2002_UM/Defense#Mid|Mid]]) and High ([[The_King_of_Fighters_2002_UM/Defense#High_.2F_Overhead|High]])
Next to either of those, (1) would mean only the first hit has to be blocked that way, (2) the second and nothing that the entire move has to be blocked said way.

| cancel =

Whether this move is special cancelable ([[The_King_of_Fighters_2002_UM/Gauges#Special_Cancel|special]]) or super cancelable ([[The_King_of_Fighters_2002_UM/Gauges#Super_Cancel_.28SC.29|super]]).
Next to either of those, (1) would mean only the first hit is cancelable, (2) the second, (x~y) every hit from x to y and nothing that the entire move is cancelable.

| startup =

The move's startup, first active frame included.

| active =

The move's active frames.
Moves with a few hits should be recorded as "x, (y), z" where the 1st is active for x frames, followed by a y frame gap before the 2nd becomes active for z frames.

| recovery =

The move's recovery frames.

| hitadv =

The move's frame advantage on hit. Use [[The_King_of_Fighters_2002_UM/Miscellaneous#Soft_Knockdown_.28SKD.29|SKD]] for soft knockdown and [[The_King_of_Fighters_2002_UM/Miscellaneous#Hard_Knockdown_.28HKD.29|HKD]] for hard.
x ~ y would mean the move has different frame advantage depending on range. x when done point-blank and y on the tip.

| blockadv =

The move's frame advantage on block.
x ~ y would mean the move has different frame advantage depending on range. x when done point-blank and y on the tip.

| invuln =

Eventual throw and/or hit invincibility the move would have, recorded as (frames)_TYPE_(Location). Startup or Active may be used to note the frame range when it matches closely.
(Startup) would mean the move is invincible until after its 1st active frame. (Startup - 1) would mean that it's invincible until its 1st active frame.

Secondary Parameters

Secundary parameters for further preparing data for moves with multiple versions/follow-ups and as such, most of these only show in the output of Template:FrameDataCargo-KOF02UM.
| version =

Name to identify the version/follow-up. A neutral jump B's version would be exactly that name while Kyo's canceled f+B would be "canceled into".

| version2 =

The move's version written in a secondary notation, like numpad. If defined, it'll display when the user's mouse hovers over the main version.

| orderId =

A number defining in what order the data for the versions/follow-ups of the move will be displayed. Start at 1 and add 1 each time.
Jump moves should be displayed in "hop, jump, neutral jump" order and command normals in "Raw, Canceled into" order.

| header =

When displaying the move's data, if yes or no the (damage, guard, etc) header should be displayed "again". The first move should always be set to "yes" (or nothing as the default is yes).
Typically, set the header to yes if there'll be a big enough description separating two moves' data to warrant showing the header again. Set it to no otherwise.

| display =

Change the display size for the image and hitbox on the data subpage. Not stored in cargo.


Example

Kyo's st.A and qcf+B>K data you can find with other examples here.

Kyo Kusanagi
kyo_sta
stand A
DamageGuardCancelStartupActiveRecoveryHit AdvantageBlock AdvantageInvulnerability
33MidSpecial545---
Source
{{MoveData-KOF02UM | character = Kyo Kusanagi | moveId = kyo_sta
| name		= stand A
| input		= st.A
| input2	= A
| images	= 02UM_Kyo_st.A_2_ima.png
| hitboxes	= 02UM_Kyo_st.A_2.png
| damage	= 33
| guard		= [[The_King_of_Fighters_2002_UM/Defense#Mid|Mid]]
| cancel	= [[The_King_of_Fighters_2002_UM/Gauges#Special_Cancel|Special]]
| startup	= 5
| active	= 4
| recovery	= 5
| hitadv	= +3
| blockadv	= +1
| invul		= 
}}
K" style="width:500px;">
Kyo Kusanagi
kyo_qcf+b>k
75 Shiki Kai


DamageGuardCancelStartupActiveRecoveryHit AdvantageBlock AdvantageInvulnerability
40 (30+10)Mid-143, (7), 914--(10~13)_Hit_(Thighs and below)
Source
{{MoveData-KOF02UM | character = Kyo Kusanagi | moveId = kyo_qcf+b>k
| name		= 75 Shiki Kai
| version	= qcf+B > K
| version2	= 236B > K
| orderId	= 1
| input		= qcf+B > K
| input2	= 236B > K
| images	= 02UM_Kyo_qcf+D_3_ima.png, 02UM_Kyo_qcf+D_4_ima.png
| hitboxes	= 02UM_Kyo_qcf+D_3.png, 02UM_Kyo_qcf+D_4.png
| damage	= 40 (30+10)
| guard		= [[The_King_of_Fighters_2002_UM/Defense#Mid|Mid]]
| cancel	= 
| startup	= 14
| active	= 3, (7), 9
| recovery	= 14
| hitadv	= '''1st=''' -12~-10 ; '''2nd=''' [[The_King_of_Fighters_2002_UM/Miscellaneous#Soft_Knockdown_.28SKD.29|SKD]]
| blockadv	= '''1st=''' -14~-12 ; '''2nd=''' -5~+3
| invul		= (10~13)_'''Hit'''_(Thighs and below)
}}

This documentation is automatically transcluded from Template:MoveData-KOF02UM/Documentation and is not included when this page is transcluded.